Architects & Engineers for 9/11 Truth
Architects & Engineers for 9/11 Truth (AE911Truth) is a fast-growing non-profit organization of more than 1,400 architectural and engineering professionals who have joined us in our call for a thorough, independent re-examination of the destruction of the three World Trade Center skyscrapers on 9/11.
The last few years have witnessed mounting scientific evidence that clearly indicates that the destruction of the Twin Towers and WTC Building 7 was not adequately explained by the official theories outlined in the 2002 FEMA and 2005/2008 NIST reports. AE911Truth is calling for a new, fully funded, truly independent and unimpeachable investigation.
We present the evidence on our website and in live multimedia presentations, which have taken us now throughout the US, Canada, Europe, Japan, New Zealand, and Australia. Most of the architects and engineers who take the time to review the evidence in our live presentation agree with our conclusions and join us in calling for a new investigation.
What the Evidence Shows
The video evidence shows that during the final destruction of the Twin Towers numerous steel frame sections were hurled horizontally up to 600 feet away. These lateral ejections and the numerous high-velocity jets of smoke and pulverized building contents visible during the destruction of the Twin Towers are blast pressure front effects that can be only caused by explosions.
The characteristics of high-order damage were observed: all three WTC skyscrapers were completely destroyed, its structural units (perimeter walls, etc.) members were shattered; heavy pieces from the Twin Towers were thrown horizontally over large distances, most of the concrete floors were pulverized, and 220 acres of metal decking are mostly missing. High-order damage is evidence that explosions with a high rate of pressure rise occurred.
The evidence for the use of explosives is supported by over one hundred accounts by FDNY first responders, many of whom reported sounds of explosions and patterned flashes of light, and with many interpreting the skyscraper destruction as being caused by “secondary devices.”
Extremely high temperatures, capable of melting steel and iron, were evident before and during the destruction of the World Trade Center Twin Towers and at Ground Zero. Seven minutes before the destruction of the South Tower a flow of molten metal appeared. Its glowing color showed that its temperature was close to white hot at the beginning of the flow, and yellow and orange further down – too hot to be caused by jet-fuel and office fires.
Billions of iron-rich microspheres in the WTC dust are additional proof of temperatures above the melting point of iron – temperatures at least 1000°F higher than can be accounted for by jet fuel and office fires. These spheres were so common in the WTC dust that they were used as a “signature marker” for WTC dust. Pyroclastic-like,rapidly expanding dust plumes and clouds during and after the destruction of the Towers are also only explainable by the rapid expansion of large amounts of gases hotter than office fires can produce.
Extremely high temperatures at Ground Zero are documented by various sources, for example in thermal images by MTI and NASA, by photographs, and by numerous witness accounts. The American Society of Safety Engineers reported that “the debris pile at Ground Zero was always tremendously hot. Thermal measurements taken by helicopter each day showed underground temperatures ranging from 400ºF to more than 2,800ºF.”
The chemical signature of thermite was found when samples of formerly molten iron from the pile, WTC steel, and iron-rich microspheres found in the dust were examined. In 2009, scientists reported finding in WTC dust samples small red/gray chips containing a highly energetic, sophisticated nanothermite composite material. When these chips were heated, they ignited, generating similar iron-rich microspheres to those found in the WTC dust. Up to now no peer-reviewed criticism of this peer-reviewed paper has been published.
Violations of standard investigative procedure and scientific openness
The government’s account of the unprecedented destruction of all three skyscrapers constitutes a mountain of distracting detail that excluded most of the relevant evidence, assumed its own conclusions, underwent no independent peer review before publication, and was largely generated by defense contractors.
Less than 1% of the WTC steel was preserved for later examination, and NIST (the National Institute of Standards and Technology) excluded most of that steel from being systematically examined for “failure modes” and “high temperature excursion.” None of the reports follow NFPA 921, the accepted US standard for fire and explosion investigation, even though NIST participated in writing that standard.
Most notably, NIST neither documents nor discusses most of the evidence for blast pressure front effects, high order damage, thermal effects of explosions, and extremely high temperatures. NIST’s Frequently Asked Questions web page feigns ignorance regarding the difference between thermite and nanothermite, although top NIST officials and engineers participated in the development of nanothermite on behalf of the US aerospace and defense complex. NIST’s animated computer model of WTC 7 bears no resemblance to the videos of the destruction, and the details of the model have been withheld, claiming that it would “jeopardize public safety.”
WTC Building 7, a 47-story skyscraper was not hit by an airplane and yet was the third modern steel-framed skyscraper to be destroyed with near-perfect symmetry at high downward acceleration on 9/11. It was destroyed in the exact manner of a building being taken down by professional controlled demolition with explosives – as corroborated by controlled demolition professionals and structural engineers. WTC 7 was in free-fall for 2.25 seconds (a third of its fall time) or about eight stories (admitted by NIST). The columns near the bottom thus offered no resistance and therefore must have been removed, virtually simultaneously at each level and synchronistically timed floor by floor, a phenomenon that fire can’t possibly accomplish.
WTC 7 exhibited typical features of controlled demolition:
1.Rapid onset of symmetrical destruction of main structure
2.Free-fall acceleration through the path of what was the greatest resistance
3.Massive volume of pyroclastic-like dust clouds
4.Straight-down destruction almost into the building’s footprint
5.Foreknowledge of destruction among first responders, media, NYPD, FDNY
6.Sounds of explosions heard by witnesses
The WTC 7 debris pile exhibited the same extremely high temperatures (above the melting point of iron), just as in the piles from WTC 1 and WTC 2 (see thermal images by MTI, NASA and EarthData). Evidence of molten iron with sulfur attacking and corroding the structural steel was documented by FEMA in Appendix C of the May 2002 BPAT Report. This evidence fits the fingerprint of thermate, which produces molten iron as one reaction product.
By the way, “normal office fires” (the official cause of the complete, straight-down destruction) have never brought down a modern steel-framed skyscraper at all, much less with any or all of these features of explosive demolition.
Please review this evidence and much more online at http://AE911Truth.org, and then sign our petition. We need your help in order to achieve a truly independent investigation.
Richard Gage, AIA, Architect
Founder and CEO, Architects & Engineers for 9/11 Truth